Proaim 22ft Crane with Gold pan Tilt Head & 150mm Bowl Tripod Stands w spreader + Libec Lanc Controller & E-Focus & Zoom Lens Control kit for Wedding documentary, commercial independent videography

 

CAMERA & WEIGHTS ARE NOT INCLUDED

 

            The PROAIM 22ft CRANE has ability to telescope and nest within itself. This crane’s modularity is built on its lightweight, octagonal, high grade aluminum, black powder coated 4ft feet extension sections which start at the tail of the jib, with the largest diameter, and progressively get smaller as you get closer to the camera. The best part is, the arm breaks down to fit into a 51” Carrying case. The pivot, camera platform, rear control center and miscellaneous items fit into a Proaim Suitcase. The Proaim Crane is the best suited equipment for making professional videos at various ocasions and filming video concerts.

 

Control:-

• Exchange switch: LANC / P(LANC - Most Sony and Canon cameras with LANC jack / P - Panasonic cameras with Cam Remote jack).
• REC: Record start / stop .
• ZOOM: Zoom lever can be variable for zoom speed.

 

Physical:-

• Clamp distance (diameter): 0.4 - 1.2" (10 - 30mm) .
• Connector cable: 2.5mm Stereo mini jack .
• Cable Length: 22ft + 3ft (Extension).

 

Operating Temperature:-

• 32 - 104°F (0 - 40°C)

 

Weight:-

• 6.7 oz (190g).

 

 

 

 

 

1. Proaim 22ft Long Jib Crane with accessories:-

• Camera Platform
• rear control Section
• Stress cable
• Proaim Carrying Case for Jib Arm & Stand
• Proaim Custom-fit Suitcase for Accessories
• Instruction Manual

2. Proaim Gold Pan Titl Head with accessories:-

• JoyStick Control Unit
• 12volt AC Adapter
• Universal Adapter for Worldwide
• 40 Feet Long Control Cable
• 1.5 meter long 3pinXLR cable (for using 12VDC Battery Packs)
• Camera Mounting Chucknut (1/4" screw)
• 4 Head Mounting Screws
• Carrying Case With Custom-Fit Packing
• Instruction Manual

3. Proaim 150mm Bowl Jib Stand

4. Spreader & feet

5. Focus & Zoom Control kit:-

• Remote Control with Mounting Clamp
• Zoom Bracket w/Gearbox Block
• Focus Bracket w/Gearbox Block
• 32ft long Drive Cable with connectors
• 2x 13 inch Gearbelts 0.8 module
• Battery with Charger & Cable
• Foam Packing with Travel Bag

Libec Lanc Controller with 22ft + 3ft (Extension) long cable.

Instruction Manual.

 

 

 

 

FEATURES OF 22FT CRANE :-

• 22ft Crane is expandable from 4ft (one section) to 22ft (seven section) in 3ft increments.
• Each extendable section is 4ft long giving 1ft overlap between sections.
• Since each section slides out, pulled from the previous sections, you may store unused sections in the tail as ballast weight. This lightens your counterweight demand.
• Easy to Set-up.
• Each extended section easily slides into the previous that make Jib Arm Compact.
• Rear Control Center has provision of mounting Joystick Control box, LCD Moniotr & your Zoom Controller.

 

FEATURES OF GOLD PAN TILT HEAD:-

• This head has 360 degree end less tilting movement and 360 degree panning movement with reversal point.
• Speed is variable and is easily controlled and adjusted by "Speed" and "Dead Spot" potentiometers on the control unit.
• The Deadspot control determines the center band of the joystick where no motion will occur. This way you can set it to your abilitites and insure no crossover to the other axis when not wanted.
• You can use this head for outdoors shoot occasionally but with some sort of protection cover i.e rain cover or fiber sheet.
• You receive the GOLD PAN TILT HEAD with assembled wiring with Top and Bottom Motor. You just need to Install the Power out to head (3 pin connector) and 12 volt DC power (4 pin XLR) in rear of joystick box.

 

 

 

SPECIFICATIONS
JIB ARM:
Jib Arm Material	High Grade Alluminum HE30
Jib Arm Shap	Octagonal
Jib Arm Dimensions	Jib Arm Octagonal Tube Internal Diameter Outer Diameter Ist Section (weight section) 164mm 156mm 2nd Section 154mm 146mm 3rd Section 144mm 136mm 4th Section 134mm 126mm 5th Section 124mm 116mm 6th Section 114mm 106mm 7th Section (Top Section) 104mm 96mm
Height from Ground	20ft
Jib Arm Thickness	3mm
Jib Crane Length	22ft (6.7 Meter)
Jib each Arm length	4ft
Finish	Black Powder Coated
Coupling Jib Arm Sections	A union coupling design of Jib Arm is done by washer and Steel bolt and shank with external clamps as well as Pin Lock for double locking System
Jib Arm Break downs to	7 Sections of 4ft each
Camera Plateform Levelling	By Control Cable
Stress cable	High carbon steel with electro galvanised 4mm tested wire at 800kg
Multiple Alignment	Multiple user friendly alignment of Stress Cable is provided For making Jib Stand straight without any curve
Carrying Case size	51 iches
Jib Crane Weight	30kg (66lbs)
Max Camera Package Load Capacity  including Power Head (weight of Power Head - 4.8kg (10.5lbs)	45lbs (20kg)
HEIGHT RANGE:
Height of Jib Arm while Stand Adjusted at Maximum height of 5ft	20ft high at 22ft length 17.4ft high at 19ft length 15ft high at 16ft length 12ft high at 13ft length 9ft high at 10ft length 6ft high at 7ft length
BALANCING CHART:
Add Counter Weights in the rear section of Jib according to Camera and Pan Tilt Head weight as per this chart :	The jib has a varying weight ratio depending on the length you have chosen. The 22ft arm itself balances at about 137.5lbs. Just multiply the weight, of the additional items you will put on the end of the arm, by 5 and you will know how much weight to buy. Buy a few extras in case you add other accessories. 19ft arm balances at about 88lbs - Multiply the weight, of the additional items you will put on the end of the arm, by 4 & add the weights accordingly. 16ft arm balances at about 49lbs - Multiply the wieght, of the additional items you will put on the end of arm, by 3.5 & add the weights accordingly. 13ft arm balances at about 27lbs - Multiply the wieght, of the additional items you will put on the end of arm, by 2 & add the weights accordingly. 10ft arm balances at about 7.4lbs - Multiply the wieght, of the additional items you will put on the end of arm, by 1.8 & add the weights accordingly.
JIB STAND:
Material Used	Alluminum
Max height	3ft
Mount Type	150mm Bowl
Spreader Feet	Made of solid plastic and Synthetic Rubber
Spreader Max Opening from center	3.4ft
GOLD PAN TILT HEAD:
Maximum camera weight capacity	30lbs
Pan movement	360 degrees
Tilt movement	360 degrees
Speed Conrol	Variable-controlled speed from 6 degrees/sec (low speed) to 51 degrees/sec (high speed)
Minimum height of head	18 inch
Maximum height of head	26 inch
Material Used	Precision machined parts with the highest standards of industrial grade electronic components. Gears made of Brass
AC Adapter input	AC 100 - 240V ; output - DC 12V -2A
Two Motors	Has two high torque, coreless DC motors that rotates (pans) and tilts the head 360 degrees.
Speed Time	It takes 2 minutes to pan at 360 degrees at its slowest speed without stopping and 7 seconds at its highest speed.  It will consistently go at its slowest speed without stopping.  The camera platform height can be adjusted at any point.
Mounting Base	Square with four mounting screw & nut
Weight	10.5lbs

 

 

 

CAMERA IS NOT INCLUDED

 

22ft Crane can also be used in the following lengths

 

 

 

 

 

 

 

 

• Paypal
• Bank Transfer (If you want to use this mode contact us for Bank Detail)

• We ship worldwide.
• We ship using airmail shipping viz Fedex or Pexcourier service.
• We will ship the shipment after 7-8 days after receiving the payment. Normally, it will take 5-7 business days to reach the shipment at its destination.
• The buyer must contact us if the item is not received within 15 days after dispatching the shipment.
• Orders received after 5:00pm central time are considered received on the next business day.
• We CANNOT ship to PO Box Address, AP0/FPO addresses, Guam, Manilaor, melilla & Ceuta destination.  If you have a PO box address, please provide a street address to avoid shipping delays.
• We don't provide local pickups.
• Our shipping charges include costs to package in the highest quality packing material.
• We do combine shipping for the purchase of multiple items.

• To return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it.
• Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packing.
• Warranty does not cover items faults caused by misuse(i.e physical or liquid damage)
• All shipping charges are non-refundable.
• Return delivery costs are the responsibility of the Buyer. We will cover the cost of sending replacement /repaired items.
• Within 7 days after receiving your products, We offer a no-hassle 7 days exchange / replace only if your items are found to be defective.
• After 3 month all replacements and repairs are provided lifetime on the cost price of the part, shipping cost and part cost will be the responsibility of the customer.
• All products are under free warranty for 3 months for all replacement and repair items shipping cost covered by us.
• Kindly don't leave negative feedback / paypal dispute without communicating with us. We will try our best to solve your every problem till your satisfaction regarding our product.