Proaim 7000 Reverse Arm Vest Flycam6000 With 7" LCD Monitor Kit
PROAIM-7000 REVERSE ARM WITH DV OPERATOR VEST + FLYCAM 6000 :-
- The high tension springs allow this to handle a camera load upto 41 lbs.
- Its combined camera and sled carrying capacity ranges from 5-41 lbs.
This system includes:-
- PROAIM-7000 Reverse Arm.
- DV Operator Vest.
- A Flycam 6000 stabilizer with lcd mounting adapter and battery mounting plate.
- Tripod Stand.
camera, lcd monitor & battery are for demonstration purpose only.
The PROAIM-7000 Reverse Arm, DV Operator Vest and Flycam 6000 is packed in grey foam to save the shipment from damages during transition. The grey foam is packed in a black bag. The black bag is easy and comfortable for carrying the product during shooting.
PROAIM-7000 REVERSE ARM
l-key tool set in 3mm, 4mm and 5mm is provided to operate the system.
FEATURES OF PROAIM-7000 REVERSE ARM:-
PROAIM-7000 Reverse Arm has a capacity of lifting range upto 25" both arm section with a tool-free one-touch lift adjustment for each section.
Exceptionally desinged system for standard and low mode video shots.
PROAIM-7000 Reverse Arm boom range 25".
Consists of high-tension springs to regulate weight of the camera.
The Springs approaches the reverse position just with one-touch lift adjustment.
The arm gives the smooth movements, comfort at any adjusted point.
- PROAIM-7000 Reverse Arm gives an excellent results of stablility while running, walking at any level of adjustment.
- Aluminum Fabricated Body.
- Powder Coated.
- Consists of 26 Bearings.
- High-tension sprigs made of high grade stainless steel.
- Arn Gimbal Connector made of aluminum supported by stainless steel shaft.
- Arm Vest Connector Socket made of stainless steel.
Fast and easy to setup the arm at required position.
Sophisticated and Precision made aluminum Arm.
Load Capacity :5 to 50pounds.
Weight : 11 lbs.
Strong and elegant look.
By using this knob, you can create a movement of the arm upto 25" from head to the waist.
ARM VEST CONNECTOR SOCKET:-
The socket tends the arm to be in a locked position as per the requirement of the cameraman.
Features of Socket :-
Therefore, the REVERSE PROAIM-7000 ARM is a boom in the camera Stabilization System world.
DV OPERATOR VEST:-
The PROAIM-7000 Reverse Arm is outfitted with a sophisticated professionally designed DV OPERATOR VEST. The DV Operator Vest can hold and evenly distribute the weight of the system across the operator's shoulders, back, and hips.The padded vest has six attachment points for its suspension system. There are two snap-locks on the shoulder pads, two 26 inch long belts at the waist supporting pad and two 26 inch long belts at the center of the vest secured by velcro.For safety, quick release snap locks and belts with quick release buckles allow the vest to be removed quickly.
FEATURES OF DV OPERATOR VEST:-
- The vest is fully padded.
- DV Vest uses self-locking aluminium snap-locks so you can tighten the vest really quick. snap-locks that makes you release the tension of the vest within seconds
- The straps themselves are made of though nylon and Velcro so they can be easily replaced or adjusted to suit individual operators.
- The lightweight and comfortable Supportive Vest can be adjusted to fit a wide range of operators.
- The PROAIM-7000 Reverse Arm is screwed right on to its socket, so you're not stuck with that thing banging around when you're taking a break between shots.
Chest plate is all made of alluminum black anodizing. The Chest Plate is completely locked with stainless steel screws. The length of the chest plate can be adjusted according to the height of the person. There are three knob adjutments of the chest plate. Basically, you'll spend a few minutes the first time you put this thing on in order to get it comfortable. Once you've tightened all the straps and snap-locks, you shouldn't have to change anything (unless somebody else wears it). You need one-time adjustment for all. The Socket is made of steel.
- Smart, Comfortable, & Cushioned Vest Jacket.
- Lightweight and comfortable.
- High endurance.
- Easy Attachment and detachment with the Arm.
Most hand-held shots suffer from a distinct jerkness. Undesired shocks of walking consist of two elements:-
- Quick movement of the entire camera by a small amount, and
- rotation of the camera itself (tilt, pan, and roll).
You can also fix the weights downside of the weight plate.
Our steadicam features:-
- Universal Camera base plate
- Adjustable Gimbal
- Weight holding plate
- Weights for balancing your camera
- You can also mount the batteries of some other companies like Sony, Anton.
The Anton battery mounting plate in the following image is for demonstration purpose only.
FEATURES OF STABILIZER:-
GIMBAL SPECIFICATIONS :-
Gimbal has been designed to prevent angular deviations from causing the slightest disruption to your shot. The Gimbal occupy aluminum and stainless-steel construction and precision, flanged, extended-race ball bearings in all three axes, which yields higher payloads and superb angular isolation. This robust new, all-metal gimbal now permits your stabilizer to fly cameras weighing up to 17lbs
- Your shots will tell the story. You'll shoot more telephoto, under more challenging conditions, than ever and your clients will be amazed. With this Ball Bearing Gimbal, this system can deliver superb results at twice the focal length as with the standard non-metallic gimbal.
- Wheelbarrow bearing provides Rotational control over camera so the camera can be easily rotated on its axis.
- Grip swavels left and right from the bolt. You can easily move whole steadicam up and down.
- Angle bracket enables grip to move up and down.
UNIVERSAL CAMERA BASE PLATE WITH QUICK RELEASE CLAMP:-
The Camera Base plate has both 1/4" and 3/8" mounting slots (holes) to accommodate all variety of camera bases. You can slide your camera with base plate of steadicam on both the horizontal and vertical axes, achieved by means of thumbscrews and a movable camera base plate. This helps in setting the camera even more easily.The quick release system uses a lever operated clamp. To mount the camera, you press the lever to lock open a cam-like lock. Now mount the camera to the plate with the help of screws provided. You then slide the plate into the clamp's front flanges and press it down in back to push down a pin that closes the cam to lock the plate into position.
You can slide a plate in only one end of the clamp and out the same (unidirectional). You can slide a long plate back and forth in the channel to adjust the camera-subject distance.Gross balancing and composition adjustments can be achieved by sliding the plate within the jaws of the clamp with a movement range of up to 24mm.Fine adjustment is made with the aluminum knobs; aluminum knobsdelivers 1.25mm of travel per full revolution.
BALANCING THE CAMERA:-
The base of the stabilizing system is made up of heavy aluminum and steel rods that exerts weights. The aluminum weight plates have set on stainless steel. The weights are put into weight cups which are screwed onto the aluminum weight plates. Main function of these weights is to balance your camera on this stablizer.You can hold lcd monitor at one side of the Flycam 6000.
The idea of holding screen at another side of post is that the eye does not touch the camera in order to transfer shock to video. Therefore, the searcher picture is transferred by means of a internal wiring (wiring is done from inside the post). There are slots in post for this very purpose) to the monitor so that person operating this system can walk or run without giving any shock to this system.The monitor and battery mount is stronger easier to flip for low mode and has a wider range of positions, both vertically and horizontally.
PROAIM 7" TFT LCD MONITOR KIT WITH BATTERY
The ProAim 7" Widescreen Color TFT LCD Monitor displays 4:3 and 16:9 widescreen and works perfectly with dv/hdv/dslr camcorder or any other camcorder which is lacking an external LCD screen. Our Proaim LCD screen has a high resolution, ensures sharp focus, the LCD screen displays 480 x 234 pixels.. It is fully compatible with NTSC & PAL. The LCD features AC-DC Power Adapter, Remote Control, direct connecting AV cables, Rechargeable Battery Pack, Headphone Jack etc.. The lcd monitor attaches to camera's accessory shoe with the help of shoe mounting adapter. The monitor has an on-screen display for easy adjustment of all settings; color, brightness, contrast, volume etc..
You can use this LCD Monitor with your any other package like shoulder mount, stabilisation system etc.. with the help of any 1/4" screw adapter
Proaim LCD Monitor Kit Includes :-
- 7" Wide LCD Monitor
- 12 volt Battery Pack 1800mAh
- AC-DC Adapter
- AC Charger
- Remote Control
- DC Car Power Adapter
- AV Cable with male RCA jacks
- Earphone Cable Jack
- Antenna Cord
- Portable Tabletop stand with Mounting accessory
- Accessory Shoe Mounting Adapter
- Velcro to attach battery to LCD
Should Mount, LCD Adapter & camera showing in this photograph are not included
Jib & mounting arm not included
For using LCD with Jib crane, you will need to buy extension cable from somewhere else
- The 7" widescreen LCD can be fit to any camera through shoe mounting directly
- Also can be mounted with the 360 swivel mount
- Best uses for with the stabilisation systems
- You can also use it with your shoulder rigs
- Mounting on stand is better option when no shoe mounting is available on the camera
- The monitor is of best use with Jibs & Cranes. Though you will require long cable for this purpose
|Features & Specifications
- Male RCA jacks for a direct connection to your camera without adapters!
- 16:9 or 4:3 Adjustable Display widescreen
- Compatible with most Digital SLR and HD DV Cameras including Sony, Nikon, Canon, Panasonic, JVC....
- Headphone jack
- High output stereo speakers
- Full functional Remote control
- NTSC & PAL Compatible
- Battery attachment on back of LCD itself
- LCD stand for tabletop mounting
- 360 degree swivel mount
- Antenna Mounting
- Attaches to camera's accessory shoe
- On-board AV input
- Chargeable Battery of 1800 mAh
- Video System : PAL/SECAM/NTSC
- Sound System : BG/DK/I/M/N
- Screen : Color TFT LCD
- Screen Size: 7 inches
- Audio Output: 1W (MAX)
- Back lightdevice: LED & high brightness cold cathode fuorescent tube
Connectors : -
- RF IN JACK
- HEADPHONE JACK
- AV OUT JACK
- AV IN JACK
- DC 12V IN JACK
- Two kind power for using.
- AC DC Adapter.
- 12V Automobile battery -- Automobile adapter.
- Consumption : <7W.
This LCD Package is an useful accessory which your camera is waiting for! You can use it with your most professionsal camera equipments to give you better scnerio. The small, lightweight battery lasts up to 3-4 hours. This is completely portable and an affordable accessory kit. Don't miss this opportunity, these are selling out quick!
TRIPOD STAND & DOCKING BRACKET
We accept payment through following modes.
- Bank Transfer (If you want to use this mode contact us for Bank Detail)
- We ship worldwide.
- We ship using airmail shipping viz Fedex or Pexcourier service.
- We will ship the shipment after 7-8 days after receiving the payment. Normally, it will take 5-7 business days to reach the shipment at its destination.
- The buyer must contact us if the item is not received within 15 days after dispatching the shipment.
- Orders received after 5:00pm central time are considered received on the next business day.
- We CANNOT ship to PO Box Address, AP0/FPO addresses, Guam, Manilaor, melilla & Ceuta destination. If you have a PO box address, please provide a street address to avoid shipping delays.
- We don't provide local pickups.
- Our shipping charges include costs to package in the highest quality packing material.
- We do combine shipping for the purchase of multiple items.
RETURN POLICY :-
- To return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it.
- Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packing.
- Warranty does not cover items faults caused by misuse(i.e physical or liquid damage)
- All shipping charges are non-refundable.
Return delivery costs are the responsibility of the Buyer. We will cover the cost of sending replacement /repaired items.
Within 7 days after receiving your products, We offer a no-hassle 7 days exchange / replace only if your items are found to be defective.
After 3 month all replacements and repairs are provided lifetime on the cost price of the part, shipping cost and part cost will be the responsibility of the customer.
All products are under free warranty for 3months for all replacement and repair items shipping cost covered by us.
Kindly don't leave negative feedback / paypal dispute without communicating with us. We will try our best to solve your every problem till your satisfaction regarding our product.